Call waiting (camp-on), Busy override - joining a call in progress – Siemens HiPath 5000 RSM User Manual
Page 25
If You Cannot Reach a Destination ...
25
25
25
25
Step by Step
Call Waiting (Camp-On)
It is important that you reach the called party, but the
number is busy.
Lift the handset.
Enter the internal station number.
Wait (approx. 5 seconds) until the busy tone is followed
by the ring tone.
The called party can then respond
Busy Override - Joining a Call in
Progress
This function is only available if it has been configured
by the service technician (contact the service person-
nel).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
(
)
Enter the code.
The called party and person to whom this party is
talking hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
The called party can prevent automatic call wait-
ing
If this feature is configured (contact the service
personnel), you will hear the ring tone
immediately.