Sony 4-129-925-11(1) - Manual (Page 11)

11 GB
Gettin
g
Sta
rted
Connecting the FM wire
antenna (aerial)
Connect the FM wire antenna (aerial) to the
75
Ω COAXIAL jack.
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it
as horizontal as possible.
• If you have poor FM reception, use a 75-ohm coaxial
cable (not supplied) to connect the control unit to an
outdoor FM antenna (aerial) as shown below.
Bundling the cables
You can bundle all connecting cables of the
stand and other components, using the cable ties
(supplied).
1
Connect the components to the stand.
For details, refer to pages 13 to 17.
2
Insert a cable tie (supplied) into each of
the two holes at the rear of the stand
until they click.
3
Bundle the cables, and then insert the
end of the cable tie through the slit of
the cable tie.
Notes
Tip
TV OUT DVD IN
DMPORT
HDMI
SAT/CATV
IN
DC 5V
0.7A MAX
BD IN
ANTENNA
AM 75 COAXIAL
FM
FM wire antenna (aerial)
(supplied)
75
Ω COAXIAL jack
ANTENNA
75 COAXIAL
FM AM
Rear of the stand
Outdoor FM antenna (aerial)
Cable tie
continued