Sony HT-V700DP - Manual (Page 26)

26
VIDEO Operation (Continued)
11
Use v to select the SPEED option.
Use B/b to select the desired recording speed
(AUTO, SP or EP).
AUTO mode determines how much tape is left and switch-
es speed from SP to EP, if necessary, to complete record-
ing the program. There will be some picture and sound
distortion at the point of the speed change.
12
Use v to select the REPEAT option.
Use B/b to select the desired repeat (ONCE,
WEEKLY or DAILY).
ONCE: for recording up to 8 programs on a single day or
over the days within a period of 1 year.
WEEKLY: for recording up to 8 programs on a certain day
of every week.
DAILY: for recording up to 8 programs at the same time(s)
Monday through Friday.
Tip
If the input data is wrong, use V/v to select the data
and correct it using B/b.
13
Press SETUP/MENU, the program will be memo-
rized by the DVD/VCR Receiver.
TIMER indicator lights in the display window.
If the program preset time has past, the PAST TIME
PROGRAMMED message will appear on the TV
screen. Return to the incorrect program and program it
with the correct time.
If you had entered a past date, timer recording will be
performed on that date of the next year.
Additional programs may be entered by repeating steps
1-12.
Cable Users: If your cable hookup is via a TV
converter box, you can program multiple recordings only
on the converter box output channel. This is because the
converter determines what channel you view through your
DVD/VCR Receiver.
Tip
If you are finished programming and you want to set the
DVD/VCR Receiver to record the programs you have entered,
make sure you have inserted a tape into the DVD/VCR
Receiver. The DVD/VCR Receiver is now set to record the
preset programs.
Notes
If the power fails or the DVD/VCR Receiver is unplugged
from the AC outlet, the correct clock time and timer settings
are kept in memory for approximately 3 seconds. After 3
seconds, the clock and program timer must be reset when
power is restored. Reset the clock according to instructions.
After setting up a timer recording, recording will start if no
other timer recordings are scheduled to occur at the same
time (see “Program Priority” at right).
The timer recording will not start during other program is
recording.
Program Priority
Do not overlap programs, since overlapping portions of
the conflicting programs will not be recorded. Earlier
recording times have priority over later recording times
as shown in the diagram.
Checking, Editing or Erasing Timer
Record Programming
Programming can be checked whenever the DVD/VCR
Receiver is turned on.
1 Press SETUP/MENU and the MAIN menu will
appear.
2 Use V/v to select the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
3 Use B/b to select a program you want to check, edit
or erase. To edit the data, use V/v option to edit then
edit it using B/b. To erase the program, press
CLEAR on PROGRM number is selected.
4 Press SETUP/MENU to return to the TV screen.