Sony HT-V700DP - Manual (Page 39)

39
OPERA
TION
Radio Operation (Continued)
For your reference
Weak FM stations
“ST” and “TUNED” may flash when the weak FM stereo
signal is received, select another station.
To turn off the radio
Press @ / 1 to turn the DVD/VCR Receiver off or select
another function mode (DVD, VIDEO, etc).
To improve reception
Realign the antenna.
Tuning into a Station Automatically
1
Press TUNER FM/AM on the remote control or
on the front panel until the frequency band
appears on the display and TV screen.
2
Press CH/PRESET (+/–) on the remote control or
front panel to select the desired column.
If you select a blank column, R-SKIP appears in the
display window.
3
Press TUNER FM/AM on the remote control or
front panel to select the desired band.
4
Hold down TUNING (+/–) on the remote control
for 1 or 2 seconds, and a station is searched for
automatically.
5
Press MEMORY.
Note
The search may not stop at a station with a very weak
signal.
Labeling Stations
1
Press b to move to the station name column.
2
Use the V/v buttons to select the character then
use the B/b buttons to shift to the next or previ-
ous character.
3
Press ENTER to confirm the station name.
4
Press MEMORY on the remote control.
The station name is stored.
- - - - - - - RADIO - - - - - - - 2/10
TUNER/BAND TUNING +/-
MEMORY/CLEAR
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz