Sony DVP-F5 - Manual (Page 21)

21 Getting Started
Getting Started
Set the items as shown
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DOLBY DIGITAL:
DIGITAL OUT
To set, press , then .
To quit, press .
STANDARD
DOLBY SURROUND
D-PCM
DTS: OFF
ENTER
DISPLAY
Setups for the optical digital connection
• To listen to the sound thr ough speakers connected to a r eceiver
(amplifier) which has a digital connector and lacks a built-in DTS or
Dolby Digital decoder, or to output the sound to a digital component
such as a DAT or MD deck
Set the “AUDIO SETUP” items in the setup display (page 91) as shown in
the illustration below . These ar e the default settings.
z If you have a digital component with a built-in DTS or Dolby Digital decoder
You can enjoy multi-channel sur round sound by connecting the component via the
OPTICAL OUT connector using an optical digital connecting cor d (not supplied).
For details on hookups and settings, see page 22.
Notes
When you have made the connections using an optical digital connecting cor d,
do not set “DOLBY DIGIT AL” to “DOLBY DIGIT AL” and “DTS” to “ON” in
“DIGIT AL OUT.” If you do, a loud noise will suddenly come out fr
om the
speakers, affecting your ears or causing the speakers to be damaged.
• When you have made the connections using an optical digital connecting cor d, set
“VES” to “OFF” in the Contr ol Menu display (page 60). Other wise, the player will
not output the Dolby Digital signals when you select “DIGIT AL OUT” in “AUDIO
SETUP” and set “DOLBY DIGITAL” to “D-PCM.”
• When you have made the connections using an optical digital connecting cor d and
output the signals which do not r eproduce the Dolby Sur round (Pro Logic) ef fect,
set “DOWNMIX” to “NORMAL” in “AUDIO SETUP” in the setup display.
• You cannot make digital audio recordings of discs recorded in multi-channel
surround format directly using an MD deck or DAT deck.