Slim Devices 2 - Manual (Page 10)

8 Squeezebox2 Owner’s Guide
SLIM DEVICES
Confi guring Squeezebox2
When you plug in Squeezebox2, the Slim Devices logo is displayed briefl y,
followed by a welcome message.
Set Up Networking
1. Press the RIGHT arrow on the remote control.
The Set Up Networking menu option is displayed.
2. Press the RIGHT arrow to enter networking setup.
3. Choose whether you want to connect Squeezebox2 to a wireless or
wired network by pressing the UP and DOWN arrows on the remote.
4. When you have made your selection, press the RIGHT arrow.
If you have a wired-only Squeezebox2, skip to step 5.
If you have a wireless Squeezebox2:
a. Squeezebox2 asks you for your local region or country. Scroll
using the DOWN arrow on the remote until you fi nd the local
region. Press the RIGHT arrow on the remote to select your
region.
Hint: Failure to select the appropriate region may violate local laws.
b. Squeezebox2 will scan to fi nd your wireless network.
If your router is not broadcasting your network name (also
known as SSID), enter it using the letters on the remote (similar
to the text messaging feature on a cellphone). If you are in an
area where there are multiple wireless networks, you can scroll
down using the remote until you fi nd the one you want to use.
c. Press the RIGHT arrow.
d. Choose the type of encryption your wireless network uses. If
you are unsure, check the manual that came with your wireless
router.
You can choose from No password/no encryption, 64-bit
WEP, 128-bit WEP, or WPA Personal. Press the RIGHT arrow.
e. If your network is secured with WEP or WPA encryption, you’ll
need to enter the network password or key using the numbers
and letters on the remote and press the
RIGHT arrow.