Splendide WD802M - Manual (Page 4)

REMOVE SHIPPING BRACKETS
1. Remove back panel screws and lift panel clear
(Fig. 1, Item. A).
2. Remove fixing screws from the four brackets and
cross bearing (Fig. 2, Item Y) then remove
brackets.
3. Fix back panel with 3 screws previously removed
(Fig. 1, Item A).
4. Close the 4 holes on the cabinet with the plastic
blanking plugs that you will find in the accessories
bag (Fig. 2, Item X & Z).
Leveling
After selecting a permanent location, the machine
should be properly leveled to prevent vibration.
To do this, adjust one or both front levelers, as
needed, after loosening the lock nuts. Once your
washer is perfectly leveled, be sure to tighten the lock
nuts (Fig. 3).
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric
shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
WARNING - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance.
If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Page 2
FOR YOUR OWN PROTECTION, AND TO PREVENT ACCIDENTS, INJURY AND FIRE, PLEASE READ
THE FOLLOWING CAREFULLY:
• Destroy the carton and plastic bags after the washer-
dryer has been unpacked.
• Children should never be left alone or unattended in
the area where appliances are located.
• Washer installation and grounding must be done in
accordance with local codes by a qualified installer.
Installation instructions are included in this manual for
the installer's reference.
• Use only low sudsing detergents suitable for front
loading washers, or a small amount of regular deter-
gent. The soap suds should never exceed the mid-line
of the port-hole.
• The washer must be plugged into a properly grounded
three (3) prong electrical outlet. For your safety, the
third or round grounding prong must never be
removed. DO NOT USE AN EXTENSION CORD.
• Repair or replacement of a part should be made only
by a qualified service technician to prevent personal
injury or damage to the machine. Ask your dealer for a
list of authorized repair service companies.
• Disconnect power to the washer at the circuit breaker
or fuse box, or unplug the machine in an emergency,
or when servicing is required. Have the installer show
you and label the proper switch or fuse at the electrical
disconnect box.
WARNING - The Appliance Should Be Connected To
An Individual Branch Circuit With No. 14 AWG
Wire And Protected By 15 A Fuse or Breaker.
IMPORTANT
In the accessories bag you will also find a spanner that is to be used for removing brackets and leveling washer-dryer
feet.