Ruger MINI-14 - Manual (Page 33)

34
WA R N I NG –PARTS PURCHASERS
It is the purc h a s e r’s responsibility to be
absolutely certain that any parts ord e red fro m
the factory are correctly fitted and installed.
F i re a rms are complicated mechanisms and
IMPROPER FITTING OF PA RTS MAY RESULT
IN A DANGEROUS MALFUNCTION, DAMAGE
TO THE FIREARM, AND SERIOUS INJURY TO
THE SHOOTER AND OTHER PERSONS.
T h e
p u rchaser and installer of parts must accept full
responsibility for the correct adjustment and
functioning of the rifle after such installation.
PARTS MUST FIT CORRECTLY
ORDERING PARTS
Please contact the New Hampshire Product Service Department for parts
availability and current prices. All parts orders for the RUGER
® MINI-14 ®
rifle should be sent to: Sturm, Ruger & Co., Inc., Product Service Department,
411 Sunapee Street, Newport, New Hampshire 03773, 603-865-2442. We cannot
comply with open account or C.O.D. orders. Payment in the form of a check,
money order, Visa or Mastercard must accompany your order. Credit Card orders
must include the account number, expiration date and whether it is a Visa or
Mastercard account. Minimum parts order is $1.00 plus $3.50 shipping and
handling charge. Order parts by Part Name and Part Number and include the
entire serial number of the firearm for which the parts are being ordered. There
is a minimum net labor charge of $20.00 plus $12.00 shipping and handling
charge if the parts are factory fitted. All factory fitted parts are fit on an exchange
basis only. We will not return the replaced parts.
Barrels, and a number of other component parts must be fitted at the factory.
Company policy is to proof-test and/or function fire all barrels after fitting to the
receivers in which they are to be used. This procedure ensures maximum
protection to our customers. The special proof-test ammunition used in this
testing is sold only to bonafide firearms manufacturers and is not available to
gun shops, gunsmiths, or individuals.
Because the receiver of the RUGER ® MINI-14 ® is a serial numbered
component, it is defined as a “firearm” by Federal law and is not sold as a
separate component.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on
an exchange basis only. We will not return the replaced parts. We will not return
any part that is broken, malfunctioning, badly worn or has been modified. See
“Warning – Parts Purchasers”, above.
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired.