Loading originals and print media, Loading originals, On the scanner glass – Samsung CLX-6240 Series User Manual

Page 32: In the dadf (or adf), 32 loading originals

Advertising
background image

32 _Loading originals and print media

loading originals and print media

This chapter introduces you how to load originals and print media into your machine.

This chapter includes:

Loading originals

Selecting print media

Changing the size of the paper in the paper tray

Loading paper

Setting the paper size and type

LOADING ORIGINALS

You can use the scanner glass or DADF (or ADF) to load an original for

copying, scanning, and sending a fax.

On the scanner glass

Make sure that no originals are in the DADF (or ADF). If an original is

detected in the DADF (or ADF), the machine gives it priority over the original

on the scanner glass. To get the best scan quality, especially for colored or

gray-scaled images, use the scanner glass.
1. Lift and open the scanner lid.

2. Place the original face down on the scanner glass and align it with the

registration guide at the top left corner of the glass.

3. Close the scanner lid.

In the DADF (or ADF)

Using the DADF (or ADF), you can load up to 50 sheets of paper (75 g/m

2

,

20 lb bond) for one job.
When you use the DADF (or ADF):

In the ADF: Do not load paper smaller than 142 x 148 mm (5.6 x

5.8 inches) or larger than 216 x 356 mm (8.5 x 14 inches).

In the DADF: Do not load paper smaller than 69.5 x 148 mm (2.7 x

5.8 inches) or larger than 216 x 356 mm (8.5 x 14 inches).

Do not attempt to load the following types of paper:

- carbon-paper or carbon-backed paper

- coated paper

- onion skin or thin paper

- wrinkled or creased paper

- curled or rolled paper

- torn paper

Remove all staples and paper clips before loading.

Make sure any glue, ink, or correction fluid on the paper is completely

dry before loading.

Do not load originals that include different sizes or weights of paper.

CLX-6200ND, CLX-6210FX, CLX-6240FX has the DADF function

which can let you scan on both sides of the original media at once.

See "Scan on both sides of paper" on page 47.

Leaving the scanner lid open while copying may affect copy quality

and toner consumption.

Dust on the scanner glass may cause black spots on the printout.

Always keep it clean.

If you are copying a page from a book or magazine, lift the scanner

lid until its hinges are caught by the stopper and then close the lid.

If the book or magazine is thicker than 30 mm, start copying with

the lid open.

Advertising