Samsung NETWORK DIGITAL VIDEO RECORDER - Manual (Page 9)

4
CHAPTER 3
SETUP PROCEDURES
1. MAIN MENU SETUP
SETUP MENU
SYSTEM SETUP
CAMERA SETUP
RECORD SETUP
SCHEDULE RECORD
EVENT LIST
HDD MANAGEMENT
LOAD DEFAULT
EXIT
Press the MENU button to go into the main menu.
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU to escape to exit the set up mode.
Contents:
c SYSTEM SETUP
System set up
d CAMERA SETUP
Camera set up
3 RECORD SETUP
Recording set up
4 SCHEDULE RECORD
Schedule Recording set up
g EVENT LIST
Event indexing
h HDD MANAGEMENT
Hard disk management
i LOAD DEFAULT
Return to factory setting
j EXIT
Escape from the setup menu
2. SYSTEM SETUP
SYSTEM SETUP
> BUZZER DURATION 3SEC
VIDEO LOSS ALARM ON
HDD PASSWORD
SET TIME/DATE
EXIT
Press the MENU button to go into the main menu.
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU to escape to exit the set up mode.
Contents:
c BUZZER DURATION 3SEC (1-30)
Use ◄ or ► button to adjust the duration time of the buzzer action.
d VIDEO LOSS ALARM
On for default
e HDD PASSWARD
A password can be setup to protect the hard disk content. It needs to be entered in order
to perform a hard disk format. Initial number is 1111.
Use the view control button on the front panel to input the number.
is “1” , is “2” , is “3” , is “4”
f SET TIME/DATE
Use the ◄ or ► button to select items.
Press the ▲ or ▼ button to increase / decrease the number.
g EXIT