Samsung BN68-01538A-00 - Manual (Page 31)

english - 9
Setting up the tV with your PC
Preset: Press the SourCe button to select PC mode.
1. Press the menu button to display the menu.
Press the enter button, to select "Picture".
. Select the required option by pressing the ▲ or ▼ button,
then press the enter button.
. When you are satisfied with your setting, press the
enter button.
. Press the eXIt button to exit.
♦ auto adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
easy Setting
1. Press the toolS button on the remote control.
. Press the ▲ or ▼ button to select “Auto Adjustment”, then
press the enter button.
♦ Screen adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Fine-
tuning alone, then adjust the frequency as best as possible
(coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the
center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the enter button.
Press the ◄ or ► button to adjust the screen quality.
Press the enter button.
Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the enter button.
Image reset
You can replace all image settings with the factory default
values.
Screen adjustment
Coarse 0
Fine 
Position 
Image reset 
tV
move enter return
Position tV
move enter return
Picture
mode : Standard 
Backlight 
Contrast 9
Brightness 
Sharpness 0
auto adjustment 
Screen adjustment 
Detailed Settings 
Picture options 
reset : oK 
tV
move enter return
Screen adjustment
Coarse 0
Fine 
Position 
Image reset 
tV
move enter return
auto adjustment in Progress
Please wait.
Picture mode : Standard
Sound mode : Custom
Sleep timer : off
SrS tS Xt : off
energy Saving : off
PIP
auto adjustment
move enter exit
tools
BN68-01538A-Eng.indd 29 2008-04-07 ¿АИД 7:58:02