Samsung BN68-01538A-00 User Manual
Page 7
english -
DVI In(hDmI) [r-auDIo-l]
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
480i
480p
576i
576p
720p
1080i
HDMI/DVI 50Hz
X
X
X
O
O
O
HDMI/DVI 60Hz
X
O
X
X
O
O
Component
O
O
O
O
O
O
4
auDIo out [r-auDIo-l]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends
to corresponding audio in connectors on the Amplifier or DVD Home Theatre.
5
ant In
To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
6
SerVICe
Connector for SERVICE only.
7
KenSIngton loCK (depending on the model)
The Kensington Lock (optional) is a device used to physically fix the system when used in a public
place.
If you want to use a locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model.
8
ComPonent In
Connect component video cables (optional) to component connector ("P
R
", "P
B
", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
and connect the DVD to component connector ("P
R
", "P
B
", "Y") on your set.
The P
R
, P
B
and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
-
➣
-
-
-
-
-
-
-
-
-
-
BN68-01538A-Eng.indd 5
2008-04-07 ¿АИД 7:57:47