Stanley Black & Decker 45SS - Manual (Page 30)

25
30SS, 36SS, 45SS
Rev: 12/21/2011
Troubleshooting
Problem Possible Causes Solution
Snow blower will not
move forward or reverse 1. Transmission cable out of
adjustment (too loose) or
damaged.
1. Readjust transmission cable
If damaged, replace and readjust.
Cannot move snow
blower when the engine is
off 1. Transmission handle is pressed
into the engaged position
2. Transmission cable out of
adjustment (too tight)
1. Release transmission handle
2. Readjust transmission cable
Engine is overheating 1. Dirt in the fuel line
2. Dirty air filter
3. Low engine oil
4. Fouled
spark plug
5. Misuse of the snow blower
1. Replace fuel filter and flush tank
2. Clean or replace the air filter
3. Add
engine oil
4. Replace spark plug
5. Walk the snow blower slowly