Sony 3-875-814-21(1) - Manual (Page 121)

121 GB
Ad
justi
ng Se
ttings
* To activate the H.A.T.S. function, select “ON” for “CTRL FOR HDMI.”
To change the display
You can check the sound field, etc., by
changing the information on the display.
1 Press AMP.
The receiver can be operated using the
remote.
2 Select the input for which you want to
check the information.
3 Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change as follows.
Input you selected
t Sound field type t
Stream Information t Input name ...
When listening to FM and AM radio
Station name
t Frequency t Sound field
type t Volume...
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only
blank spaces have been entered.
When receiving RDS broadcasts
PS (Program Service name)
a)
, Preset name,
Band, or Preset number t Frequency,
band and preset number t PTY (Program
Type) indication
b)
t RT (Radio Text)
indication
c)
t Sound field type
a)This information also appears for non-RDS
FM stations.
b)Type of program being broadcast
c)Text messages sent by the RDS station.
System Settings NAME IN ? [xxxxxxxx]
PARTY SETUP [xxxxxxx] ZONE2/3, ZONE2, ZONE3 ZONE2/3
12V TRIG. MAIN [xxxxx] OFF, CTRL, ZONE, INPUT OFF
12V TRIG. ZONE2 [xxxxx] OFF, CTRL, ZONE, MAIN OFF
12V TRIG. ZONE3 [xxxxx] OFF, CTRL, ZONE, MAIN OFF
RS-232C CONTROL [xxx] OFF, ON ON
SERVER [xxx] OFF, ON OFF
VERSION [x.xxx] – –
Menu Item Parameter Initial
setting