Sony 3-875-814-21(1) - Manual (Page 148)

148 GB
6
Press V/v repeatedly to select
the component you want, then
press .
7
Press V/v repeatedly to select
“Reset,” then press .
The confirming message appears on the
TV screen.
8
Press V/v repeatedly to select
“Yes,” then press .
All the contents of the selected input (e.g.,
all the programmed data) are cleared.
9
Repeat steps 6 to 8 to clear all
programmed data.
Note
The macro itself is not cleared. A default code will
be output when you have set a preset code or learned
code in the macro step.