Smeg SNZ91MFX - Manual (Page 7)

Instructions for the user
9
8. FRONT CONTROL PANEL
All the cooker controls and commands are on the front panel.
ELECTRIC OVEN THERMOSTAT FRONT LEFT BURNER
ELECTRIC OVEN FUNCTION KNOB REAR LEFT BURNER
VARIABLE GRILL CENTRAL BURNER
REAR RIGHT BURNER
FRONT RIGHT BURNER
If the cooker is equipped with an electronic programmer, before using the oven make sure that the
symbol ; appears on the display. See paragraph “11. ELECTRONIC PROGRAMMER”.
HOB BURNER COMMAND KNOB
The flame is lit by pressing the knob and turning it anticlockwise to minimum
flame . To adjust the flame turn the knob between maximum ( ) and
minimum ( ). The burner goes out when the knob is returned to the position.
MAIN OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by turning the knob clockwise to
the required temperature, between 50° and 260°C.
If the appliance has an electric oven, the warning light will come on when the
oven is heating up. When it goes out it means that the required temperature has
been reached. Regular flashing means that oven temperature is being
constantly maintained at the programmed level.
VARIABLE GRILL KNOB
This allows to vary heat intensity when cooking with the grill. The knob can be
set with continuity between “0” and the stop release position, which
corresponds to maximum heat.