Sanyo VPC-FH1EX - Manual (Page 113)

English
92
NORMAL
/SHOO
T
IN
G
RECORDING MENU 2
Motion compensation (image stabilizer) setting
Your camera can minimize a jittery picture by compensating for unintentional
hand motion.
HINT
If the motion compensation does not seem to be working...
i Due to the mechanical characteristics of this function, it may not be
possible for the camera to compensate for violent motion.
i If the digital zoom (page 70) is being used, the large magnification factor
may make it difficult for the motion compensation function to work correctly.
i When the scene select function is set to night view portrait / or lamp
Q
, the motion compensation effect may be insignificant.
Can’t set the “photo stabilizer” setting?
i The photo stabilizer is automatically turned off ] after any of the
following operations.
h Setting the exposure to T, g or H (pages 54 and 97).
h Setting the photo wide D-range setting (pages 54 and 99) to “ON”.
h Setting the still image NR (noise reduction) setting (page 126) to “ON”.
h Starting video clip recording.
h Setting the camera to the sequential shots mode (pages 50 and 89).
When motion compensation is enabled,
i The following icons are shown on the monitor:
Did the scene select setting change?
i When the photo stabilizer is set to \, if the scene select setting is +, it
will automatically change to =.
00:04:30
Full-HD
The video stabilizer is active
The photo stabilizer is active
Both the video stabilizer and the photo stabilizer are
active