Samsung SCC-C7453N - Manual (Page 27)

English _
English
IRIS
The IRIS menu is useful if you set to adjust the
intensity of radiation incoming to the camera.
ALC : Adjust the open and close of the iris.
- LEVEL : Select an overall brightness level.
- BLC : With <BACKLIGHT> set to
<BLC>, you can specify the BLC area.
With AREA set to <USER>, you can
specify the position and size.
MANUAL : Adjust the iris level manually.
The overall brightness target of a camera
will be set to ALC level 0, while the iris
can be adjusted manually.
AGC
With this, you can adjust the AGC level of a
camera.
With AGC active, if the signal strength falls
below the standard level, AGC will amplify the
video signal to automatically improve the
sensitivity.
If <SENS-UP> is set to <OFF>, or <FIx>
mode, the <mOTION> menu will switch to
<AGC>.
With the USER ( ) submenu selected, press
[ENTER] to display the corresponding screen.
In this mode, you can select from VERY LOW
to VERY HIGH in 16 levels, enabling deeper, wider choices to your convenience.
With the FIX ( ) submenu selected, press [ENTER] to display the corresponding
screen. In this mode, you can select an individualized mode in 16 levels, regardless of
the brightness.


M 
ALC
LEVEL [ 00] ----I----
BACKLIGHT BLC
AREA USER
<SIZE>
<LOCATION>
MANUAL
LEVEL [ 00] ----I----
 CAMERA SET 
CAMERA ID OFF
IRIS ALC
AGC (VERY HIGH) ---
DNR MID
SHUTTER OFF
SENS-UP OFF
FLICKERLESS OFF
XDR MID
00956B-NA_SCC-C7453N-ENG.indb 27 2009-08-13 오후 10:58:39