Samsung SCC-C7453N - Manual (Page 28)

_ setup
setup
As long as the DAY/NIGHT menu is set to AUTO in Camera Setup, the AGC menu is
not available.
As long as FLICKERLESS is set to ON, the AGC mode is not available.
mOTION
You can specify a level of AGC for controlling the camera motion.
This is available only of the SENSE UP menu is set to AUTO.
Select F.FAST if you want to monitor a very fast moving object in a low contrast
scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same
condition.
As long as DAY/NIGHT is set to < AUTO>, the <MOTION> menu is not available.
DNR
Reduces the noise on the camera image.
The higher the level is, the greater the effect is.
Set it to <USER> to specify the level.
SHUTTER
You can select a fixed fast electronic shutter
speed in 7 options ranging from 1/100 to 1/10k,
which is mostly used to take a picture of a fast
moving object.
As long as SENSE UP is set to AUTO, FIXED /
FLICKERLESS to ON, the SHUTTER menu is not
available.
SENS-UP
Automatically senses the darkness level at night or in a low contrast scene, and
extends the accumulation time accordingly; you can select <AUTO> or <FIx> for a
bright and sharp image.
If the SHUTTER menu is set to fixed electronic shutter mode, the SENSE UP menu
will not be available.
As long as the FLICKERLESS is set to ON, you cannot set the SENS-UP FIX.
M 



M 

 CAMERA SET 
CAMERA ID OFF
IRIS ALC
AGC (VERY HIGH) ---
DNR MID
SHUTTER 1/100
SENS-UP (OFF) ---
FLICKERLESS (OFF) ---
XDR MID
00956B-NA_SCC-C7453N-ENG.indb 28 2009-08-13 오후 10:58:39