Charging the battery, A d g – Siemens A60 User Manual

Page 11

Advertising
background image

©

Sieme

ns

AG

2003, I:\Mobil

\L

55\A60_abgel._von_C60L

io

n\en\s

ug\_von_itl\A60K_

Startup.fm

left page (10)

of A60, short, en, A31008-H5870-A1-1-7619 (19.09.2003, 16:13)

Getting started

10

VAR Langua

ge: English; VA

R issue

da

te

: 0

8-August-2003

Charging the battery

The battery is not supplied fully

charged. Plug the charger cable into

the bottom of the phone, plug the

power supply unit into a mains

power socket and charge for at least

two hours

.

Display when charging is in progress

h

During charging.

Charging time
An empty battery is fully charged

after about 2 hours. Charging is only

possible within a temperature range

of +5 °C to +40 °C. If the tempera-

ture rises/falls 5 °C above/below this,

the charge symbol flashes a warn-

ing. The voltage specified on the

power supply unit must not be

exceeded.

Charge icon not visible
If the battery was fully discharged,

the charging symbol will not be

immediately visible on connection to

the power supply unit. It will appear

after up to two hours. In this case the

battery is fully charged after

3–4 hours.
Only use the power supply unit provided!

Display while in service
Charge level display during opera-

tion (empty-full):

a d g

A beep sounds when the battery is

nearly empty. The charge level of the

battery is displayed correctly only

after uninterrupted charging/dis-

charging. You should therefore not

remove the battery unnecessarily

and

where possible not interrupt charging

prematurely

.

Additional notes
The power supply unit will become hot after

extended use. This is normal and is not

dangerous.

Advertising