Samsung SID-452 - Manual (Page 5)

Installation of the camera should be
performed by qualified service personnel only.
As installation of the camera requires experience and
skill, installation without the assistance of qualified
service personnel may result in a risk of fire or electric
shock. Contact our agency for installation.
Stop use immediately if smoke or
unusual heat is detected in the camera.
Do not install the camera in a wet place
or a place that is exposed to fuel or gas.
It may result in malfunction, an electric
shock or fire.
Do not install the camera in an
unstable location.
It may fall.
Do not touch the power plug with wet
hands.
It may result in an electric shock.
Do not attempt to disassemble it, or
place any foreign objects inside it.
It may result in malfunction and fire.
Do not install the camera in locations
subject to extreme temperature conditions.
Only use the camera in conditions where
temperatures are between -10°C and
+50°C. Be especially careful to provide
ventilation when operating in high
temperatures.
Do not install the camera in
unstable lighting conditions.
Severe changes in lighting, or flickering,
can cause the camera to work incorrectly.
Never face the camera directly
into strong light.
Never face the camera directly into
strong light.
It can damage the CCD.
Do not drop the camera or
subject it to physical shock.
It can cause malfunctions to occur.
• If the camera is exposed to spotlight or object reflecting strong light, smear or
blooming may occur.
• Please check that the power satisfies the normal specification before connecting
the camera.
Notes
Precautions
COLOR DOME CAMERA COLOR DOME CAMERA User’s Manual User’s Manual 9 8
It may result in fire.