Samsung SCC-C9302(F)P - Manual (Page 2)

2 3
Important Safety Instructions Safety Precautions
E E
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding- type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13. Unplug this apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
The purpose of safety precautions is to prevent accidental injury or property
damage. Always observe all safety precautions.
❖ The precautions are divided into "Warnings" and "Cautions" as
distinguished below:
Warning
Ignoring this precaution
may result in death or
serious injury. Caution
Ignoring this precaution
may result in injury or
damage to property.
Warnings
1. Be sure to use only the standard adapter which is specified in the
specification sheet.
Using any other adapter could cause fire, electrical shock, or damage
to the product.
2. Check the external connection terminals first before connecting the power source
and signal wires.
Connect the alarm signal wires to the alarm terminals. Connect the DC12V power
adapter to the SCC-C9302P power input, making sure that the currect polarity is
observed.
Connect the DC12V or AC24V power adapter to the SCC-C9302P power input.
3. Do not connect multiple cameras to a single adapter. (Exceeding the
capacity may cause abnormal heat generation or fire.)
4. Securely plug the power cord into the power receptacle.
(A loose connection may result in fire.)
5. When mounting the camera on a wall or ceiling, fasten it safely and securely.
(A falling camera may cause personal injury.)
00577A-SCC-C9302(F)P-E/R/P 9/30/06 10:54 AM Page 2