Before installation – Samsung SCC-C9302(F)P User Manual

Page 8

Advertising
background image

14

15

Before Installation

E

E

Before Installation

Installation Example

Description of Installation HOLEs

- Make sure the installation location can support over 5 times (approx.5.5

kg)the total weight of the ANTI VANDAL DOME CAMERA (SCC-C9302P).

- Be careful not to let the cable be jammed in inappropriate places or to let

the insulation covering of the cable peel off during installation.

This may result in malfunction or a fire hazard.

- Items may fall and may cause hazards while installing the

product.Therefore ensure that no-one is beneath the installation location.

Move valuables to a safe place before installation.

- Able to install on ceilings.
- Directly install on a PIPE coming down from the ceiling.
- Directly install on walls.
- Directly install on a PIPE coming out from a wall.
- Install on walls, corners in buildings, columns and other locations using the

WALL MOUNT ADAPTOR (SADT -102WM), CORNER MOUNT ADAPTOR
(SADT-110CM)and POLE MOUNT ADAPTOR (SADT-100PM).
(The above ADAPTOR types are sold separately.)
a. Wall Mount Adaptor (SAD-102WM)
b. Corner Mount Adaptor (SADT-110CM)
c. Pole Mount Adaptor (SADT-100PM)

A : Use when directly installing on the ceiling or a wall.

- Waterproofed only when the SCREW -MACHINE (M5 X L6...)is closed

up when not in use.

B : Use when directly installing on the JUNCTION BOX

- SCC-C9302P can be assembled into a 4 1/8" DIAMETER ROUND

TYPE JUNCTION BOX.
SCC-C9302F is assembled outside of the 4 1/8" DIAMETER ROUND
TYPE EXTENSION BOX,and then must be covered with the GASKET
and COVER.
(JUNCTION BOX,GASKET and COVER are sold separately.)

C : Use when installing the WALL MOUNT ADAPTOR (SADT - 102WM)

- Waterproofed only when the SCREW -MACHINE (M5 X L6...)is closed

up when not in use.

SCC-C9302P bottom

SCC-C9302F bottom

To additionally connect the ALARM CABLE,remove the rubber
stopper,pass the cable through the hole and connect.
- The rubber stopper attached to the ALARM CABLE must be

properly set onto the CASE to make it waterproof.

A

A

C

B

B

00577A-SCC-C9302(F)P-E/R/P 9/30/06 10:54 AM Page 14

Advertising