Symbol Technologies PPT 2800 - Manual (Page 7)

5
Q u i c k R e f e r e n c e
Charging the Battery
Before using your PPT 2800 for the first time, charge the lithium-
ion battery in the terminal for about 2 1/2 hours, using the cradle
or the synchronization cable. Follow these same procedures to
recharge the battery.
Your terminal is equipped with a memory backup battery which
automatically charges from the fully-charged lithium-ion battery.
This backup battery retains data in memory when the terminal’s
battery is removed, and takes several hours to charge when you
first use your terminal.
Note: If you remove your lithium-ion battery before the back-
up battery is fully charged, data may be lost. For this
reason, DO NOT remove the battery within the first ten
hours of use.
Charging the Battery Using the Cradle
1. Plug the cradle into a wall outlet.
2. Insert the PPT 2800 terminal in the cradle.
Terminal Charge LED