Sharp Aquos LC 30HV6U - Manual (Page 52)

52
Useful adjustment settings
INPUT
TV
ANT-A/B
TWIN
MODE
AV
POWER
MTS CC
PICTURE SELECT
TV VCR CBL
/SAT
/DTV DVD
/LD
Virtual
Input signal source
TV/SAT/DVD
RETURN MENU
SET/
ENTER
MENU DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
POWER
MENU
GUIDE
INFO
Press MENU and the TV MENU screen
displays.
1
2
3
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press SET/ENTER.
Press INPUT on the remote control unit or
on the Display.
Press INPUT on the remote control unit or
on the Display to select the input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
1
2
Input signal setting
For setting the signal type of external equipment
connected to INPUT 1 or 3 terminals.
4
Press a/b to select a signal type you want
to set, and then press SET/ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
NOTE
• The System automatically sets input signals from
“INPUT2”, “INPUT4” and “PC”.
• If no (color) image displays, try to change the signal
type.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 3 signal selection to “Auto”
when other equipment is connected will result in the
following connectivity priority.
Input selection
Can use for selecting the input source.
NOTE
• Some items may be grayed out. They are not selectable.
INPUT 1
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
INPUT 3
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
4. DVI
Press INPUT on the remote control unit or
on the Display and select “INPUT3”, as
explained in Input selection.
Select “Auto” or “DVI” from the “Input Select”
menu for INPUT 3 signals, as explained in
Input signal setting.
Press MENU and TV MENU screen displays.
Press a/b to select “Input Signal”, and then
press SET/ENTER.
TV MENU [Setup ... Input Signal]
Setup Option
Position
[English]
[Standard]
[Mode1]
Picture Flip
Parental CTRL
Stretch Mode
[VGA] Input Signal
Language
Speaker [Internal]
1
2
4
3
5
Press c/d to select “Setup”.
DVI input signal setting
The Digital input signal switches automatically between
1080i, 720p and VGA or 480p. For VGA or 480p, set
manually following the steps as shown below.
The Analog input signal also switches automatically
between 1080i, 540p and VGA, and it does not need
to be set manually (“Input Signal” does not appear in
the menu).
The DVI-HDTV terminal of this System supports the
HDCP* standard.
480p VGA
6
Press c/d to select a signal type you want
to set, and then press SET/ENTER.
NOTE
• * What is HDCP (High-Bandwidth Digital Content
Protection)?
• HDCP is a copyright protection technology that uses
TMDS (Transmission Minimized Differential Signal).
• HDCP was developed to prevent the illegal copying of
DVI signals.
Display
INPUT button