Samsung CLP 550 - Manual (Page 73)

U SING THE C ONTROL P ANEL 2.19
2
IP Address
You can select this item only when you
set IP Get Method to Static. This
item lets you enter the IP address
manually. Press the scroll button to set
the value of the 1st byte between 1
and 255, and then press the Enter
button.
Set the value for the 2nd, 3rd and 4th
byte the same way.
Subnet Mask
You can set this item only when you set
IP Get Method to Static. This item
lets you enter the subnet mask
manually. Press the scroll button to set
the value of the 1st byte between 1
and 255, and then press the Enter
button.
Set the value for the 2nd, 3rd and 4th
byte the same way.
Gateway
You can set this item only when you set
IP Get Method to Static. This item
lets you enter the gateway manually.
Press the scroll button to set the value
of the 1st byte between 1 and 255, and
then press the Enter button.
Set the value for the 2nd, 3rd and 4th
byte the same way.
Config 802.11b
Configure the Wireless Network
environments.
If you select Yes, the following options
are available: SSID, Operation
Mode, Channel, Authentication,
Encryption, Using Key, Key Type
and Key1~Key4.
See “Configuring the Wireless
Network” on page E.12
Note: This menu only appears when
an optional Wireless Network interface
Card is fitted.
Item Explanation
Values: Yes, No*