Setting up the network, Supported operating systems, Configuring network protocol via the machine – Samsung SCX-4X26 User Manual
Page 24
24 _
Getting started
SETTING UP THE NETWORK
You need to set up the network protocols on the machine to use it as your
network printer. You can set up the basic network settings through the
machine's control panel.
Supported operating systems
The following table shows the network environments supported by the
machine:
Configuring network protocol via the machine
You can set up TCP/IP network parameters, follow the steps listed below.
1.
Make sure your machine is connected to the network with an RJ-45
Ethernet cable.
2.
Make sure you have turned on the machine.
3.
Press Menu on the control panel, until you see Network on the bottom
line of the display.
4.
Press OK to access the menu.
5.
Press the left/right arrow until TCP/IP displays.
6.
Press OK.
7.
Press the left/right arrow until Static displays.
8.
Press OK.
9.
Press the left/right arrow until IP Address displays.
10.
Press OK.
Enter a byte between 0 and 255 using the number keypad and press the
left/right arrow to move between bytes.
Repeat this to complete the address from the 1st byte to the 4th byte.
11.
When you have finished, press OK.
Repeat steps 9 and 10 to configure the other TCP/IP parameters:
subnet mask and gateway address.
ITEM
REQUIREMENTS
Network interface
•
Ethernet 10/100 Base-TX
Network operating system
•
Windows 2000/XP/2003/2008/Vista/7/
Server 2008 R2
•
Various Linux OS
•
Mac OS 10.3 ~ 10.6
Network protocols
•
TCP/IP
•
Standard TCP/IP
•
LPR
•
IPP/HTTP
•
Bonjour
•
DHCP
•
BOOTP
If you want to set up DHCP network protocol, go to
Bonjour program that is appropriate for your computer operating
system and install the program. This program will allow you to set
network parameters automatically. Follow the instructions in the
installation window. This program does not support Linux.
Contact the network administrator if you are not sure how to configure.
You can also set up the network settings through the network
administration programs.
•
SyncThru™ Web Admin Service
: Web-based printer
management solution for network administrators. SyncThru™
Web Admin Service
provides you with an efficient way of
managing network devices and lets you remotely monitor and
troubleshoot network machines from any site with corporate
internet access. Download this program from
.
•
SyncThru™ Web Service
: Web server embedded on your
network print server, which allows you to:
- Configure the network parameters necessary for the machine to
connect to various network environments.
- Customize machine settings.
•
SetIP
: Utility program allowing you to select a network interface
and manually configure the IP addresses for use with the TCP/IP
protocol. See "Using SetIP program" on page 25.