Samsung SF-5800P - Manual (Page 27)

1.18
Set Up Your Machine
System Setup
Ringer Volume
You can adjust the volume of the ringer to the desired loudness.
1. Press Menu , then press System Setup on the one-touch keypad.
The display shows ÔRINGER VOLUME?.Õ
2. Press Enter , then use
¹ or to choose the desired loudness of the
ringer.
The selected ringer sounds and the display shows the loudness level
with > symbol. The more, the louder.
No > symbol turns the ringer off. The machine will work normally
even if the ringer is set to off.
3. Press Enter when the desired volume level is selected. The display
shows the next setup menu ÔDEFAULT SETTINGS?Õ For details on
menu, see below.
4. To return to Standby mode, press Stop .
Home Resolution and Home Contrast
The print resolution and contrast can be set to their most frequently
used modes. Whenever a document is sent or copied, the home
contrast and resolution mode will be activated unless otherwise
changed by using
Resolution or Contrast button on the control
panel . See page 2.8 for details.
1. Press Menu , then press System Setup on the one-touch keypad.
The display shows ÔRINGER VOLUME?.Õ
2. Press
¹ or until you find ÔDEFAULT SETTINGS?Õ.
RINGER VOLUME
[>>>>>>>> ]