Sanyo VPC-S1080 - Manual (Page 28)

EN-27
Erasing Images
Erasing single image / Erasing all images
1. Press the MODE button, and set the camera
mode to [x].
„
The last image will be displayed on the
screen.
2. Select the image you want to erase with the
[ /X buttons.
3. Press the %F button.
„ The deletion menu will be displayed.
4. Select [Single] or [All] with the /
buttons, and press the SET/DISPLAY button.
„
[Single]: Erases the selected image or the
last image.
„ [All]: Erases all of the images except for
the protected images.
5. Select [Execute] with the /
buttons, and press the SET/DISPLAY button.
„
To not erase, select [Cancel], and press
the SET/DISPLAY button.
6. To exit from the menu, press the MENU
button.
„ Deleting an image will not affect sequential image numbering. For example, if you delete image
number 240, the next captured image will be numbered 241 even though 240 no longer exists.
In other words, an image-number is retired when an image is deleted and will not be reused or
reassigned to another subsequently captured image.