Sanyo VPC-S1080 - Manual (Page 41)

EN-40
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
„
Select the image that you want to print with
the [ /X buttons.
„ Select the [Print Num] (up to 99) with the
/ buttons.
„ After selecting the desired image and printing
number, press the SET/DISPLAY button to
confirm.
4. Select [Print] with the / buttons,
and press the SET/DISPLAY button to start
printing.
5. The printing starts and the figure shown on the
right hand side appears.
„
[COMPLETE] will be displayed
temporarily, reminding you that the printing
procedure is finished.
„ If a print error is detected, [PRINT
ERROR] will be displayed.
„ The image printing may be failed if the power to the camera is cut off.