Smeg CS15-5 - Manual (Page 16)

User Instructions
18
8 ELECTRONIC PROGRAMMER (ONLY FOR MODELS WHICH
ARE EQUIPPED WITH ONE)
LIST OF FUNCTIONS
TIMER BUTTON
COOKING TIME BUTTON
END OF COOKING BUTTON
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
8.1 Time setting
When using the oven for the first time or after a power outage, the display time will blink intermittently,
showing . Press both the and buttons, while using the and buttons to adjust the
value. The display will increase or decrease by one minute by applying pressure.
Before setting the programmer, activate the desired function and temperature.
8.2 Semi-automatic cooking
This program only automatically stops the oven at the end of the cooking time.
Press the button, the display will light up and show the figures ; continue to hold the button
down and press the value adjustment buttons or at the same time to set the cooking time.
Release the button: the countdown for the programmed cooking time will begin immediately and
the display will show the actual time together with the symbols A and .
8.3 Automatic cooking
This program enables the oven to be turned on and off automatically.
Press the button, the display will light up and show the figures ; continue to hold the button
down and press the value adjustment buttons or at the same time to set the cooking time.
Press the button: the display will show the combined total of the actual time + the cooking time;
keep the button pressed and press the value adjustment buttons and to programme the time
for cooking to be completed. Release the button; the programmed countdown will begin and the
display will show the actual time together with the symbols A and .