Smeg SC112 - Manual (Page 38)

40
Instructions for the user
Replacing the glass:
• Replace the panes in the
opposite order to which they
were removed. The first middle
glass pane must be inserted
first on the front part, exactly on
the first level (figure A), and
then inserted on the back, again
in the first level (figure B).
• Pay careful attention to the four
rubber strips on the sides
(figure C). These must be
lowered during the insertion of
the first middle glass pane,
acting as a seal between the
frame and the pane of glass.
• The second middle glass pane
must be inserted first on the
front part, on the second level
(figure A), and then inserted on
the back, again in the second
level (figure B).
• Replace the internal glass pane
inserting it on the third level in
the same way as described for
the middle panes. (figure A, B).
Warning: replace the glass panes in the same order and in the same
direction that they were removed. Finally, if the door was not removed,
unlock the hinges and close it.