SMC Networks SMC-EZ109DT - Manual (Page 20)

I
NSTALLING THE
S
WITCH
8
Sample Applications
This switch segments your network, significantly increasing both
bandwidth and throughput. Any port on the switch can be
attached to a hub (a shared collision domain) or provide a
dedicated link to a single network device (such as a workstation or
server). When a port on the switch is connected to a hub (a 10 or
100 Mbps repeater), the bandwidth provided by that port is shared
by all the devices connected to the attached hub. However, when
a port is connected to an end node or to a device that breaks up
the collision domain (e.g., another switch, bridge or router), the
attached device has access to the full bandwidth provided by that
port.
Bridging Functions - This switch provides fully transparent
bridging functions. It automatically learns node addresses, that are
subsequently used to filter and forward all traffic based on the
destination address. When traffic passes between devices attached
to the same shared collision domain, those packets are filtered
from the switch. But when traffic must be passed between unique
segments (i.e., different ports on the switch), the high-speed
switching fabric forwards the packets at near zero latency.
Switching Functions - Store-and-forward switching is used to
forward traffic to other ports. This scheme ensures data integrity
and provides a clean data stream.
Flexible Configuration - This switch is not only designed to
segment your network, but also to provide a wide range of options
in setting up network connections. It can be used as a simple
stand-alone switch; or be connected with standard repeater hubs,
switches, or other network interconnection devices in various
configurations.