Sentry Industries PT40 - Manual (Page 28)

Displaying accessible groups
The List Groups command displays accessible groups for the current user.
To display accessible groups:
At the Sentry: prompt, type list groups and press Enter.
Example
The follow command displays all accessible groups for the current user:
Sentry: list groups<Enter>
Groups:
ServerGroup_1
RouterGroup_1
Displaying outlets assigned to a group
The List Group command displays outlets assigned to the specified group name.
To display outlets assigned to a group:
At the Sentry: prompt, type list group, followed by the group name and press Enter.
Example
The follow command displays the outlets assigned to the group ServerGroup_1:
Sentry: list group ServerGroup_1<Enter>
Group: ServerGroup_1
Outlet Outlet
ID Name
.A1 DataServer_1
.A2 WebServer_1
.A3 FileServer_1
Displaying accessible serial/Pass-Thru ports
The List Ports command displays accessible serial/Pass-Thru ports for the current user.
To display accessible serial/Pass-Thru ports:
At the Sentry: prompt, type list ports and press Enter.
Example
The follow command displays all accessible serial/Pass-Thru ports for the current user:
Sentry: list ports<Enter>
Port Port
ID Name
Console Console
Modem Modem
1 router1
Displaying infeed status
The Istat or Iload command displays the status of one or more infeed.
This display includes the infeed absolute and descriptive names and the Input Status and current Load
reported to the Sentry by the infeed.
To display status of one or more infeeds:
Type istat and press Enter, or
Type iload and press Enter.
Examples
The following command displays the infeed status:
Sentry: istat
Input Input Input Input
Feed ID Feed Name Status Load
.AA HQ_1_Infeed_A On 10.5 Amps
24 • Operations Sentry Commander - PT40
Installation and Operations Manual