Sentry Industries PT40 - Manual (Page 53)

Displaying trap configuration information
The Show Traps command displays information about all traps.
To display trap information:
At the Sentry: prompt, type show traps and press Enter.
Example
The following command requests trap configuration information:
Sentry: show traps <Enter>
Tower trap configuration:
Tower Tower Status
ID Name Trap
.A Florida_HQ_1 ON
Input feed trap configuration:
Input Input Status Load High
Feed ID Feed Name Trap Trap Thresh
.AA HQ_1_Infeed_A ON ON 255 A
Outlet trap configuration:
Outlet Outlet Change Status
ID Name Trap Trap
.AA1 DataServer_1 OFF ON
.AA2 WebServer_1 OFF ON
.AA3 FileServer_1 OFF ON
.AA4 OFF ON
Sentry Commander - PT40 Advanced Operations • 49
Installation and Operations Manual