Sirius Satellite Radio SCC1C - Manual (Page 12)

[
Installation
] 12
Installing the Antenna
The antenna includes a 2-3/4” cable cover/tail which covers the exposed antenna cable and
keeps it attached securely to vehicle roof. The tail also helps position the antenna the proper
distance from the window, sunroof or rear hatch.
To attach the cover/tail:
Turn the antenna upside-down and extend the cable.
Connect the cover/tail to the antenna cable, making sure that the strain-relief on the
antenna seats into the cover/tail groove.
Route the cable through the wire channel in the cover/tail. (Figure 6)
Once you have determined the proper mounting location (see next section), clean the
area with the supplied alcohol pad.
Remove the remaining protective tape from the adhesive, carefully position the antenna
and apply pressure to secure to the vehicle. (Figure 7) 1.
2.
3.
4.
5.
figure 6 figure 7
Adhesive
Strips
Antenna
Cover/Tail