Sirius Satellite Radio SCC1C - Manual (Page 8)

[
Connections
] 
Connections
Connector Information
Figure 1 identifies and describes the connectors on the SCC1C Vehicle Tuner. Figure 2
identifies the 8-pin pin-out configuration.
SC OUTPUT: Connection for the SC Interface Cable.
ANTENNA: Connection for the satellite antenna. •
•
6
7
3
1
4
8
1 Battery
2 Power Enable
3 Serial Data (RX)
4 Ground
5 Audio Right
6 Serial Data (TX)
7 Audio Ground
1 Audio Left
5
2
Note 1: The Serial Data TX and RX lines in the SiriusConnect Interface cable are crossed
Note 2: The Audio output is 1volt RMS.
figure 1
figure 2
Connect to Sirius-Ready
Headunit or SiriusConnect
Interface Translator