Siemens HiPath 4000 - Manual (Page 31)

Make a call – Comfort Functions
31
Step by Step
Voice calling in a group
A normal connection within a group or team (for team
call = speed-calling number for team members 0 to 9 or
00 to 99) can also be set up via Voice calling. To do this,
voice calling is initiated from a group telephone.
n Lift the handset.
p Enter the system code-number for "voice calling in the
group" and
p the speed calling code for the group member in ques-
tion.
or
Press the key for "voice calling in the group" (must be in-
stalled)
and
p the speed calling code for the group member in ques-
tion.
A connection to the destination loudspeaker is set up
immediately, if
•
there is no busy condition
• the handset is cradled
• and voice-calling protection has not been activated.
The called party accepts the voice call by lifting the
handset.
If the called party presses the loudspeaker key or the
line key (if installed), the connection is aborted.
The "voice calling in the group" function is line-in-
dependent – anyone can voice call anyone else.
Enter the code!