Siemens HiPath 4000 - Manual (Page 50)

List of codes
List of codes
For information on the use of codes please refer to page 9.
Recommendation
for optiPoint 410 without store key
This feature is not applicable for UK and other countries using tone dialling (default)
Function UK code Standard code Euro code Special code
Camp-on/override * 6 0 * 1 9 * 1 9
Do not disturb on/off * 5 1 / # 5 1 * 4 0 / # 4 0 * 9 3 / # 9 3
Fixed call forwarding on/off * 1 1 / # 1 1 * 4 4 / # 4 4
Fixed call forwarding –
storing destination * 2 1 * 4 9 * 9 6 * 5 6
Fixed call forwarding –
cancelling destination # 2 1 # 4 9 # 9 6 # 5 6
Variable call forwarding – stor-
ing destination * 1 1 * 4 4 * 4 4
Variable call forwarding off # 1 1 # 4 4 # 4 4
Call forwarding for another
terminal on/off * 1 4 / # 1 4 * 4 1 1 / # 4 1 1 * 4 1 1 / # 4 1 1
Pick up the call * * * 7
Display suppression own
number on/off * 2 4 / # 2 4 * 5 0 / # 5 0 * 5 0 / # 5 0
Identification on/off
(then enter PIN) * 8 / # 8 * 5 1 / # 5 4 * 5 1 / # 5 4
Call forwarding - follow me
after identification * 1 4 * 4 1 1
Conference * 9 * 3 * 3
Storing individual speed
dialling numbers * 6 4 # 8 and 0-9 # 8 and 0-9 # 2 8
Dialling individual speed
dialling numbers * 6 3 and 0-9 * 8 and 0-9 * 8 and 0-9 * 2 8
DTMF suffix-dialling (after suc-
cessfully dialling an external
number)
* # * # * #
Storing callback * 0 * 9
Cancelling callback # 0 # 9
Disconnecting oneself from
hunt group # 5 2 * 1 3 * 9 5
Rejoining hunt group * 5 2 # 1 3 # 9 5
Locking/unlocking telephone
to prevent misuse * 4 9 / # 4 9 * 1 8 / # 1 8 * 9 2 / # 9 2
Redial: storing number * 7 * 6
Redial: dialling stored number # 7 # 6