Samsung CX1 - Manual (Page 177)

175
S
e
tu
p
Men
u
7
The following five operation sounds are made during camera
operation.
Note ----------------------------------------------------------------------------------------------
If you try to perform an operation that cannot be performed, the beep sound is emitted
regardless of the [Operation Sounds] setting.
1
Display the setup menu.
• For the operating procedure, see P.161.
2
Press the ADJ./OK button " to
select [Operation Sounds] and
press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
Operation Sound Settings
Start sound : Sound when the camera is turned on.
Shutter sound : Sound when the shutter release button is pressed.
Focus sound : Sound when the shutter release button is half-pressed and the
camera focuses on the subject.
Beep sound : Error sound indicating an operation that cannot be performed.
Level sound : When [Level Setting] is set to [Sound] or [Display+Sound]
(GP.182), the sound is continually emitted at a set interval when
the camera is level in shooting mode.
Available Settings Description
All *Default setting All sounds on
Level Sound Only the level sound is emitted.
Shutter Sounds Only the shutter sound and level sound are emitted.