Samsung CX1 User Manual
Page 209
207
9
Do
w
n
lo
ad
in
g
I
m
ag
es
to
Yo
u
r Co
mp
u
ter
3
Connect the USB cable to the USB
terminal of your camera.
• Your camera turns on.
• Your computer automatically reads a file
necessary for recognizing the camera as a
drive.
• After this preparation, the camera is displayed as a drive under [My
Computer].
4
From the displayed drive,
copy a file to the desired
location.
• The figure at right shows the
folder configuration in the drive.
• When the contents of the internal
memory are displayed, the drive
name is [RICOHDCI].
Caution------------------------------------------------------------------------------------------
• Do not turn off the camera or disconnect the USB cable during image transfer.
• If a file with the same name already exists at the destination, it is overwritten. If you
do not want the file to be overwritten, transfer data to another folder, or change the file
name of the file at the destination.
Note ----------------------------------------------------------------------------------------------
When an SD memory card is loaded, its files are displayed. Otherwise, files in the internal
memory are displayed.
Example of the display in
Windows XP
Example of the display in
Windows XP