Sony RM-VL900 - Manual (Page 13)

13
To control the volume
Press VOL +/– to control the
volume, and MUTING to mute.
When you select a visual
component, the TV’s volume will
be controlled (the TV button lights
up), and when you select an audio
component, the amplifier ’s
volume will be controlled (the
AMP button lights up). You can
change this setting also (page 21).
Notes
• If you have programmed any signal
on the VOL +/– or MUTING button
of any component by the Learning
function (page 15), that signal will be
transmitted instead of controlling the
volume of the TV or amplifier when
you select that component.
• If you have programmed any signal
on the VOL +/– or MUTING button
of TV or AMP by the Learning
function, that signal will be
transmitted only when you select TV
or AMP. When you select other
components, the preset volume
control signals for TV or AMP will be
transmitted.
• If you have assigned another
component to the TV or AMP button
(page 32), the volume of the TV or
amplifier cannot be controlled even
when you select other components.
Continued
2
Press any Player Control
button.
See “Table of Preset Functions”
(page 50) for the functions of
buttons for each component.
Note
The remote control signals may be
different for some components or
functions. In this case, program the
remote control signals with the
Learning function (see page 15). Note,
however, that components and
functions that do not support the
remote control of infrared signals will
not work with this Commander.