Sony RM-VL900 - Manual (Page 7)

7
Location of Controls
1 S (set) button
2 Set indicator
3 Component Select buttons
Light or flash during operation.
4 Number buttons/AMP INPUT
select buttons
5 PIP button
6 TV/VIDEO button
7 DISPLAY button
8 Player Control buttons
9 Cursor Control & OK buttons
0 MENU button
qa VOL +/– buttons*
qs MUTING button*
qd SYSTEM CONTROL buttons
qf POWER button
qg ENT (enter) button
qh SLEEP button
qj GUIDE button
qk CH (channel) +/– buttons
ql RECALL button
* Note on the VOL +/– and
MUTING buttons
The Commander controls or mutes the
TV’s volume when you select a visual
component. The Commander controls
or mutes the amplifier’s volume when
you select an audio component.
You can change this setting also
(page 21).
NOTE
The function of control buttons vary depending on settings/operating modes.
“Table of Preset Functions” (page 50) shows how the Commander generally
operates for each component at preset mode.
These settings can be changed, and some buttons are used specifically in the setup
procedure as described in the following pages.