Spalding 211789 - Manual (Page 25)

02/04 P/N 211789
25
Secure metal spacer (28) between board brackets (49) with bolt (47), washer (66), and nut (48). 14.
48
47
28
66
49
46
46
47
47
48
48
Assemble brackets (49) to backboard using bolts (47) metal spacers (46) and nuts (48) as shown.
The spacers may fit very tightly between the brackets and may need to be tapped into place with
a hammer. 13.
66
DO NOT TIGHTEN
HARDWARE
COMPLETELY.
IMPORTANT!:
IMPORTANT!:
TIGHTEN ALL HARDWARE
FROM STEP 13 AND 14
COMPLETELY AFTER THIS
STEP.
49
Face of Backboard
46
48 47