Spalding 211789 - Manual (Page 9)

02/04 P/N 211789
9
IMPORTANT! Holes in top (1) and bottom pole (3) sections MUST align to correctly
position elevator system toward playing surface.
While maintaining alignment, bounce assembly and lower section (3) together as shown
until they no longer move toward taped reference mark.
1
2
3
3.
WOOD SCRAP
(NOT SUPPLIED)
TAPE REFERENCE
MARK
11/32" (.87 cm) SMALLER
DIAMETER HOLES OF
TOP POLE
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
OVERLAP.
NOTE: