Storage, Starting after long term storage – Simplicity 11HP User Manual
Page 26
20
11. Transport the rider to a suitable, dry, indoor location.
If the rider is to be stored 6 months or longer, block
the rider up off the wheels to relieve weight and also
to keep the tires off a damp floor. Protect tires from
prolonged exposure to direct sunlight.
STARTING AFTER
LONG TERM STORAGE
Before starting the rider after it has been stored for a
long period of time, perform the following steps.
1. Remove the blocks from under the rider.
2. Install the battery if it was removed.
3. Unplug the exhaust outlet and air cleaner.
4. Fill the fuel tank with fresh gasoline. See engine
manual for recommendations.
5. Check crankcase oil level and add proper oil if
necessary.
6. Inflate tires to proper pressure. Check fluid levels.
7. Start the engine and let it run slowly. DO NOT run at
high speed immediately after starting. Be sure to run
engine only outdoors or in well ventilated area.
Storage