Sunbeam 2576 User Manual

Page 4

Advertising
background image

TO CLEAN PRE-FILTER

TO REPLACE HEPA FILTER ASSEMBLY

Slide out Pre-Filter located in front of the Filter Assem-
bly. Rinse thoroughly with clean warm water. Set aside
to dry.

NOTE:

Use directions on the top of the HEPA Filter

Assembly for proper placement of the filters

into the assembly and for replacing the as-
sembly into the unit.

REPLACEMENT OF HEPA FILTER

After about 12 months of collecting dirt, dust, pollen
and other pollutants, the HEPA Filter of your unit will

need to be replaced.

The HEPA Filter cannot be

cleaned.

Use the enclosed reorder form to order

replacement filters if not available from your retailer.

Remove the Pre-Filter and Charcoal After-Filter from

the HEPA Filter Assembly and place aside. The HEPA

Filter can now be discarded. Using the directions on

top of the new HEPA Filter, replace the aluminum

Pre-Filter in slots provided in front of the HEPA Filter
and replace the Charcoal After-Filter in the slots pro-
vided in the back.

Using the handle, slide the HEPA Filter Assembly back
into the cabinet. Aluminum Pre-Filter will face the front

grill. Replace the Sealing Label provided with the new

HEPA Filter over the opening containing the HEPA
Filter Assembly.

TO REPLACE CABINET TOP

Replace the cabinet top by positioning over the unit

and placing on cabinet. (Figure 8) Be sure that the plas-
tic ball and socket are engaged.

Plug the cord into the electrical power source and

select desired speed.

REPLACEMENT OF CHARCOAL FILTER

ACTIVATED CHARCOAL FILTER HELPS REMOVE

HOUSEHOLD ODORS.

To remove the Charcoal Filter, remove the Sealing

Label from top of Filter Assembly and place aside so it
can be reused. Remove the Charcoal Filter from the
Filter Assembly.

Do not wash the Charcoal Filter.

It

should be replaced every 3-6 months under average
conditions. These filters are available in your retail
store or use the enclosed order form.

After replacing the Charcoal Filter, return the Filter
Assembly back into the cabinet. Reseal the top of the

Filter Assembly with the Sealing Label removed pre-
viously.

PLASTIC
BALL 8 SOCKET

Figure 8

Advertising