Sirius Satellite Radio 10 User Manual
Page 62
[
Vehicle Docking Station Installation & Use
]
0
2
3
4
5
1
options
display
back
home
7
8
9
0
6
preset
tune
jump
A.
B.
2
3
4
5
1
options
display
back
home
7
8
9
0
6
preset
tune
jump
Depending upon the mounting method you select, the mount should be assembled as de-
scribed in one of the following two sections.
Console mount method (a)
To assemble and mount the vehicle dock for the console mount method A as shown in Figure
1:
Attach the adhesive foot to the vehicle dock using the provided screws, placing the
finger grip between the adhesive dock and the vehicle dock. (Figure 2)
Before adhering the mount to the console, be sure to select your mounting position care-
fully because once the mount has been adhered to a surface, it will not be possible to
remove it and adhere it again.
Clean the selected mounting surface area in the vehicle with the alcohol swab.
Unscrew the adhesive foot from the mounting bracket. Peel the protective material off
the adhesive on the foot and press the foot firmly against the vehicle surface.
The adhesive mount should then be allowed to adhere for a minimum of 2-4 hours before
use. Best adhesion occurs after 24 hours. When the adhesive foot has achieved suf-
ficient adhesion, reattach the vehicle dock to the foot.
1.
2.
3.
4.
5.
figure 1
figure 1