Sirius Satellite Radio 10 - Manual (Page 70)

[
Vehicle Docking Station Installation & Use
] 
Selecting an FM Frequency
To listen to the audio from the Stiletto 10 using your vehicle’s FM radio, you will need to
tune the FM radio in your vehicle and the FM transmitter in the Stiletto 10 to the same FM
frequency. The FM transmitter in the Stiletto 10 defaults to 88.1 MHz, so you can begin by
tuning your vehicle’s FM radio to 88.1 MHz. If there is an FM station broadcasting on that
frequency, you will have to search for a different FM frequency to use, and the change the FM
frequency that the Stiletto 10 will use to transmit.
To change the fm frequency:
Press the
FM
FM button on the left side of the vehicle dock. (Refer to Figure 2 on page
16 for the location of the FM button.)
Use the Media Dial to select a new FM frequency (Figure 10).
OR
Press one of the 0—9 buttons to recall an FM preset (Figure 11).
Press the Select button. The Stiletto 10 will now transmit on the selected FM fre-
quency.
91.7
FM Transmit
Turn the Media Dial to
change the frequency.
Use the number keys to
recall or assign FM presets
103.9 FM4
FM Transmit
Turn the Media Dial to
change the frequency.
Use the number keys to
recall or assign FM presets
To assign fm frequencies for the fm presets:
Press the
FM
FM button on the left side of the vehicle dock.
Use the Media Dial to select an FM frequency.
Press and hold the
preset number (0—9) in which you want to store the selected FM
frequency. (Figure 11) Repeat steps 2 and 3 to assign additional FM presets.
Press the Select button to exit and transmit on the selected FM frequency, or press
the
FM
FM button to simply exit.
1.
2.
3.
1.
2.
3.
4.
figure 10 figure 10 figure 11 figure 11