Sony MKE-9020M - Manual (Page 22)

1-16
MVE-9000 IM
<LED on the SG-272 board>
D100 (B-1) : REF OK status LED
Lit while V sync of the reference input is detected.
D101 (B-1) : REF EXT status LED
Lit while sync signal is input to the reference input.
D200 (B-1) : LOCK status LED
Lit while the machine is locked to the reference signal.
TP9 (C-3) : PERR signal check terminal
PERR signal measuring terminal.
TP10 (C-3) : SERR signal check terminal
SERR signal measuring terminal.
TP11 (B-1) : PAR signal check terminal
PAR signal measuring terminal.
TP12 (D-1) : INT signal check terminal
INT signal measuring terminal.
TP13 (D-1) : CBE3 signal check terminal
CBE3 signal measuring terminal.
TP14 (C-1) : CBE2 signal check terminal
CBE2 signal measuring terminal.
TP15 (B-1) : CBE1 signal check terminal
CBE1 signal measuring terminal.
TP16 (B-1) : CBE0 signal check terminal
CBE0 signal measuring terminal.